Check Every Socket's Wiring And RCD Protection In Seconds With The PlugiWis Digital Outlet Tester
Worried About Faulty Or Incorrectly Wired Sockets In Your Home, Rental Property, Or Workshop?
Stop guessing whether your sockets are safely wired and whether your RCD protection will actually trip in a real fault situation. The PlugiWis Digital Socket Tester Pro plugs into any socket and immediately displays the wiring condition through three indicator lights covering correct wiring, open ground, open neutral, open live, live and ground reverse, and live and neutral reverse, while the backlit LCD simultaneously shows the live-to-neutral voltage, neutral-to-earth leakage voltage, and frequency so you have a complete picture of every socket's electrical condition within seconds of plugging in.
Looking For A Socket Tester That Also Verifies Whether Your RCD Or GFCI Protection Actually Works?
Confirm that your life-saving protection circuit will trip correctly before you need it in a real emergency. The PlugiWis Digital Socket Tester Pro features a dedicated red test button that sends a test current through the circuit at above 30mA for the UK and EU versions and above 5mA for the US GFCI version, verifying that the residual current device or ground fault circuit interrupter trips and cuts power as it should, with the colour-changing LCD backlight shifting from green for normal readings to orange for warning conditions so the result is immediately clear at a glance throughout every test.
Wanting A Socket Tester Compact And Portable Enough To Carry Through An Entire Property In Minutes?
Test every socket in a house, flat, caravan, or workshop quickly and without any additional equipment. The PlugiWis Digital Socket Tester Pro weighs just 64 to 75 grams depending on the version and measures approximately 68 x 65 x 62mm, making it pocket-sized and light enough to carry from room to room throughout a complete property inspection without any carrying case, extension leads, or additional test equipment, with the results available immediately on the LCD display for straightforward socket-by-socket assessment across every room during pre-purchase inspections, rental property checks, and renovation safety verifications.
Experience Instant Wiring Fault Detection And RCD Protection Testing With PlugiWis Digital Outlet Tester
Elevate your electrical safety checking capability with a socket tester engineered for immediate wiring condition display, active RCD and GFCI protection verification, and comprehensive voltage and leakage measurement. This CAT II 300V rated tester combines three-light wiring fault indication covering six fault conditions, a colour-changing backlit LCD showing live-to-neutral voltage, neutral-to-earth leakage voltage, and frequency across 90 to 250V at 45 to 65Hz, a red RCD and GFCI test button, CE certification to EN 61010-1 and EN 61326-1 standards, and a compact 64 to 75-gram design in UK, EU, and US plug versions for homeowners, landlords, electricians, renovators, and anyone who wants to know their sockets are safe.
Three-Light Wiring Fault Indicator Display
RCD And GFCI Protection Active Trip Test Button
LCD Voltage Frequency And Leakage Voltage Readings
THREE-LIGHT WIRING FAULT INDICATOR DISPLAY
Three indicator lights on the face of the tester display the socket's wiring condition against a printed fault chart covering correct wiring and six common wiring faults including open ground, open neutral, open live, live and ground reversed, live and neutral reversed, and live and ground reversed with missing ground, providing an immediate, unambiguous wiring assessment for every tested socket without requiring any electrical knowledge to interpret beyond comparing the light pattern to the chart printed directly on the tester body.
ACTIVE RCD AND GFCI PROTECTION TEST
Pressing and holding the red test button sends a test fault current above 30mA through the circuit on UK and EU versions or above 5mA on the US version to actively verify that the residual current device or ground fault circuit interrupter trips and cuts the circuit power as it was designed to do, confirming that the protection mechanism is functional and correctly calibrated rather than simply present and apparently operational without having been tested against a real trip condition during the property's electrical safety inspection.
COLOUR-CHANGING LCD BACKLIT DISPLAY
A backlit LCD with a green-to-orange colour-changing backlight shows live-to-neutral voltage, neutral-to-earth leakage voltage, and supply frequency simultaneously throughout every test, with the green backlight confirming normal readings within expected parameters and the orange backlight providing a visual warning when readings fall outside normal ranges, making the display immediately interpretable at a glance without requiring the user to memorise specific voltage thresholds or reference a separate chart during rapid socket-by-socket inspection work.
NEUTRAL-TO-EARTH LEAKAGE VOLTAGE MEASUREMENT
A dedicated neutral-to-earth voltage reading covering 0 to 99V detects the residual voltage between the neutral and earth conductors that indicates a poor neutral connection, a failed earth bond, or other wiring conditions that may not trigger the wiring fault indicator lights but represent a potential safety hazard in the installation, providing an additional layer of diagnostic information beyond the basic wiring polarity check that standard three-light testers without a display cannot reveal during a socket inspection.
90–250V GLOBAL VOLTAGE RANGE COVERAGE
Accurate voltage and frequency measurement across 90 to 250V at 45 to 65Hz with an accuracy of plus or minus 2 percent plus 2 covers the full range of mains voltages used in domestic and light commercial electrical installations worldwide, while the choice of UK, EU, and US plug versions accommodates the different socket formats and voltage standards of each region in a tester matched to the specific installation being inspected rather than a generic compromise design that may not seat correctly or read accurately in the target socket type.
CE CERTIFIED COMPACT PROFESSIONAL DESIGN
CE certification to EN 61010-1 and EN 61326-1 safety and electromagnetic compatibility standards confirms the PlugiWis meets established European safety requirements for electrical test equipment at its CAT II 300V measurement category rating, while the compact 68 x 65 x 62mm body in the 64 to 75-gram weight range makes it small enough to carry in a tool bag pocket, jacket pocket, or inspection kit throughout a full property or multi-room inspection session without meaningful weight or bulk addition to the inspector's or electrician's daily carry.
Frequently Asked Questions
What should I do if the indicator lights show a wiring fault in a socket?
Stop using the faulty socket immediately and do not plug any appliances or devices into it until it has been inspected and repaired by a qualified electrician. Mark the socket clearly so other household members or tenants do not use it inadvertently, and report the fault to the building owner or landlord if you are not the responsible party for the electrical installation. A wiring fault indication from the PlugiWis is a reliable indicator that something is wrong with the socket's wiring that requires professional investigation, even if the socket appears to work normally for powering appliances in everyday use.
How do I interpret the neutral-to-earth voltage reading on the LCD?
The neutral-to-earth voltage reading should be close to zero volts in a correctly installed and functioning circuit, as the neutral and earth conductors should be at the same potential at the consumer unit even if slight resistive differences produce a very small reading under load. A noticeably elevated neutral-to-earth reading of several volts or more may indicate a poor neutral connection, a high-resistance earth bond, or other installation issues that warrant investigation by a qualified electrician, particularly if combined with other abnormal readings or wiring fault indicator patterns during the same test session.
Will the RCD test button trip the entire floor or just the socket being tested?
The RCD or GFCI test button trips the residual current device or ground fault circuit interrupter that protects the circuit feeding the tested socket, which may also supply other sockets, lights, and appliances on the same protected circuit depending on how your electrical installation is designed and how many circuits share a single RCD in your consumer unit. Before pressing the test button, save any open work on computers and other sensitive devices connected to the same circuit, and be aware that lighting and other appliances in the same room or area may also be cut when the protection trips during the test.
Is this tester suitable for use in a caravan, boat, or workshop on a different voltage supply?
The PlugiWis covers the full 90 to 250V voltage range that encompasses both UK and European 230V mains supplies and the lower voltage supplies found in some older installations and certain workshop configurations within this range. For caravan and boat use, ensure the shore power supply voltage and socket format match the specific plug version of the PlugiWis you are using, and do not use the tester on 110V construction site transformer supplies unless you have confirmed the specific version is rated for this voltage, as the standard versions are optimised for the domestic mains voltage range of the respective country plug format.